Standby Mode - ZACO M1S Manual Del Usuario

How to use
Operation
15. Spot-mode cleaning
When choosing spot-mode cleaning in the APP, the robot will clean selected
area as a 2 m x 2 m square.
16. Non-Disturbance Mode
When non-disturbance mode is activated, scheduled cleaning and active voice
reporting are unavailable. Non-disturbance mode is activated by default during the
period from 23:00 to 9:00. Non-disturbance mode can be deactivated from the APP.
17. Carpet identification
If a carpet is identified during operation, the vacuum function will automatically turn
on and the mop is lifted. This function can be turned off by using the carpet
avoidance function in the APP. The robot will then automatically avoid carpets
Note
For children's floor mats, yoga mats, sponge mats and short pile carpets,
there may be misjudgements, which will not affect the normal use. Virtual walls /
no-go-areas can be set to prevent the robot from entering areas that do not
need cleaning.
18. Stand-by mode
The robot will go to stand-by mode automatically when it is left idle for 5 minutes.
Note
Robot will not go to stand-by mode automatically on the cleaning station.
20
Find more information at www.zaco.eu
English