ZACO M1S Manual Del Usuario página 14

How to use
Cleaning station
Start/pause button
1. In stand-by mode push to start cleaning.
2. While cleaning push to pause cleaning.
3. Press to stop recharging.
Cleaning station home button
1. When the robot is in the cleaning station press for a short time to
start/pause rinsing.
2. When the robot is in operation, press to return to the cleaning station
and recharge
3. Robot in station on stand-by press for a long time to start/stop air drying.
Note
1. The robot will start up automatically after docking with the cleaning station
and cannot be shut down during charging.
2. The clean water tank, dirty water tank, and rinsing plate must be installed
in place.
14
Find more information at www.zaco.eu
English