ZACO M1S Manual Del Usuario página 18

How to use
Operation
8. Filling and emptying the water tanks when applicable
Please fill the clean water tank with tap water before starting the robot.
Please empty the dirty water tank regularly.
Note
Do not to use cleaning products such as detergent, disinfectant, and solid
detergent to avoid corrosion and damage to the equipment.
9. Scheduled cleaning
From the APP you can set up a cleaning schedule so the robot will automatically
clean on certain days and times.
Note
Scheduled cleaning will not be carried out during the time when non-disturbance
mode is activated from the APP.
10. Equipment recharge
During operation, the robot will automatically return to the cleaning station to clean
the mop cloth regularly. After rinsing is completed, the robot will automatically
return to the point where it let off to continue cleaning. While the robot is cleaning,
press the
robot will return to the cleaning station and rinse the mop cloth. While the robot is
cleaning, press the
will return to the cleaning station, rinse the mop cloth and then enter stand-by
mode. While in stand-by mode, press the
short period of time to rinse the mop cloth. After cleaning the robot will enter the
stand-by mode.
18
button of the cleaning station for a short period of time, and the
button of the robot for a short period of time, and the robot
button of the cleaning station for a
Find more information at www.zaco.eu
English