Stop&Go Function; Power Function - Kuppersbusch KI63430SR Serie Instrucciones De Uso

will resume at the same power level
previously selected.
stop supplying energy and it will
show the symbol for "there is no pan".
When a pan is once again placed
will resume at the same power level
previously selected.
cooking zone by using the touch
controls. Otherwise an undesired
operation could occur if a pan is
accidentally placed on the cooking
zone during the three minutes.
Avoid possible accidents!
undesired operations. This function is
useful as a childproof safety.
(6) for at least one second. Once
on indicating that the control panel is
simply touch sensor (6) again.
If the on/off sensor
to turn off the appliance while the
possible to turn the cooktop on again
until it unblocks.
Silencer of the beep
touch key (11) and the locking touch
key (6) simultaneously for three
each action will be deactivated. The
time indicator (12) will display "OF".
This deactivation will not be applied
or the locking/unlocking of the touch
keys always remain activated.
To once again activate all the beeps
simultaneously press the touch key
(11) and the locking touch key
for three seconds. The time indicator
(12) will display "On"
Stop&Go Function
This function puts the cooking process
on pause. The timer will also be
paused if it is activated.
Activating the Stop function.
Touch the Stop sensor
second. The pilot (9) lights up and
the power indicators will show the
symbol
been paused.
Deactivating the Stop function
Touch Stop&Go sensor
resumes under the same power and
timer settings that were established
before the pause.

Power Function

This function supplies "extra" power
Said power depends on the size of the
(1) is used
the maximum value permitted by the
generator.
1 S l i d e t h e f i n g e r a b o v e t h e
corresponding cursor slider (2)
until the power indicator (3) shows
second.
2 The power level indicator (3) will
show the symbol
will start to supply extra power.
The Power function has a maximum
adjust to 9. A beep sounds.
On activating the Power function in
(6)
(8) for one
to indicate cooking has
(8) again.
performance of some of the others
displayed on its indicator (3).
be done either by means of touching
cursor "slider" modifying its power level
or repeating step 3.
Timer Function
(countdown clock)
This function facilitates cooking given
that you don't have to be present: You
simultaneously program each plate
for durations ranging from 1 to 99
minutes.
Setting a timer on a plate.
Once the power level is set on the
will be able to be timed.
To that end:
1 Touch sensor (10) or
Timer Indicator (12) will show "00"
and corresponding zone indicator
(3) will show the symbol
alternately with its current power
level.
2 Immediately afterwards set a
cooking time between 1 and 99
ó
the second it will start at 01. By
keeping sensors (10) ó
to 00. When there is less than one
count down in seconds.
3 . When the timer indicator (12) stops
the time automatically. The indicator
(3) relating to the timed hotplate
will alternately display the selected
power level and the symbol
EN
(11).
blinking
(10)
(11)
45