Gima 33676 Manual Del Usuario página 129

Attention:
If the interface prompts "TF card is full" during recording, it indicates that the remaining
capacity of the built-in SD card is insufficient, then the user can not record, the user need to
transfer previous cases via computer.
Manual poweroff can not be performed during recording, please exit the record mode firstly, then
power off.
Advice:
² Regularly back up the recorded cases by computer to prevent the loss of case due to
damage to the built-in SD card.
² Do not store any file except the cases.
2) When "Record" is "ON", select it to enter the stop recording menu shown as Figure 5.8.
The prompt information "You will stop recording? Are you sure?" appears on the interface,
select "Exit" after setting to "Yes" to exit the stop recording interface to enter the
measurement interface; select "Exit" after setting to "No" to enter the interface which will
continue recording.
26