Attention; Meaning Of The Pictograms; Introduction - Sagola DM 300 Manual De Instrucciones

01. Attention

Before starting the unit you must read, take into consideration and comply with all the
indications described in this Manual.
This manual must be kept in a safe place, accessible to all users of the unit.
The unit must be started and handled exclusively by personnel instructed in its use and must be
employed only for the purpose for which it was designed.
Likewise, accident prevention standards, regulations, work centre directives and current legisla-
tion and restrictions must be taken into consideration at all times.
The logotypes of SAGOLA and other SAGOLA products mentioned in this manual, are registered
trademarks or brand names of the company SAGOLA S.A.U.

02. Meaning of the pictograms

Refer to the manual/
instruction leaflet
Hearing protection

03. Introduction

The equipment you now have belongs to a family of products that transfer products at low pres-
sure, which by means of a spray gun, may be sprayed on directly.
The standard equipment is comprised of:
- Double membrane pump
- Pressure regulator for the outlet of the product
- Pressure regulator for the air inlet
- Pressure regulator for the air outlet
- Web instruction manual
- Case
Optional and complementary elements for the unit:
-Product hoses
-Air hoses.
-Spray guns
-Wall bracket kit for the equipment
-Kits for applying abrasive products
Important
information
Mandatory respiratory
protection
ENGLISH
Danger (user)
Gloves required
Safety glasses
is mandatory
Grounding