Technical Details - Sagola DM 300 Manual De Instrucciones

28/29

04. Technical details

The equipment unit is comprised of a dual membrane pneumatic pump, by means of which from
an original container product is transferred to another at adjustable pressure or to a spraying
device (spray gun).
The unit can be supplied in different versions:
- In its basic version it is solely comprised of a dual membrane pump and in the standard ver-
sions or special ones for abrasives, of the DM aluminium and the DM special abrasives models.
- With pump bracket (mobile or wall-mounted), air and product pressure regulators and a gravity
tank into which the product to be transferred or applied is dumped.
- With pump bracket (mobile or wall-mounted), air and product pressure regulators and an ab-
sorption probe, which is directly inserted into the tank that contains the product to be transferred
or applied.
Dimensions
(cm.)
Dimensions
(inchs)
Net weight
(Kg.)
Net weight
(lbs)
Pressure ratio
Maximum flow rate
Max. air consumption
Maximum air inlet
pressure
Air inlet
Product inlet
Product outlet
Maximum operating
temperature
Carriage
bracket or
wall bracket
Air pressure
regulators
Product
pressure
regulator
Product tank
Absorption
probe
DM pneumatic pumps Technical Data
DM 300 DM 1/300
- 32.4x41.5x88
- 12.7x16.3x34.6
3.3 Kg 10.5 Kg
7.27 lbs 23.15 lbs
1:1
30 L/min (1.06 cfm)
380 L/min (13 cfm)
7 bar (101.5 psi)
1/4" GAS
1/2" GAS
1/2" GAS
o
50 C 122
X OK
X Optional
X Optional
X Optional
Optional
X
Standard/Abrasives
ENGLISH
DM 400
-
-
4.7 Kg
10.36 lbs
40 L/min (1.41 cfm)
580 L/min (20 cfm)
7 bar (101.5 psi)
1/4" GAS
1/2" GAS
1/2" GAS
o o
F 50 C
X
X
X
X
X
DM 1/400
46.5x50.1x95.2
18.3x19.7x37.5
18.5 Kg
40.8 lbs
1:1
o
122 F
OK
Optional
Optional
Optional
Optional
Standard/Abrasives