SOMFY Sonesse 30 DCT Manual De Instrucciones página 10

EN
CAUTION
• The product is intended for being supplied by Class II output of an external
power supply.
• Do not use an extension cord. If the power supply cord is too short, have a
qualified electrician install an outlet near the motorised product.
NOTICE
Sonesse 30 DCT is a dry contact drive. It can't be controlled with power going
through the setting tool cable.
Connect the drive to the power supply:
▪ Black wire: -
▪ Red wire: +
2.3.2.Wiring of the control point
2.3.2.1.Setting tool or 4 wires switch
(a): Up (White/Blue wire)
(b): Stop (Blue wire)
(c): Down (White/Orange wire)
(d): Common (Orange wire).
2.3.2.2.Smoove IB+
(a): Up (White/Blue wire) or Down (White/Orange
wire)
(b): Up (White/Blue wire) or Down (White/Orange
wire)
(c): Common (Orange wire).
2.3.2.3.Wall switch
(a): Up (White/Blue wire) or Down (White/Orange
wire)
(b): Up (White/Blue wire) or Down (White/Orange
wire)
(c): Common (Orange wire).
10
©
Copyright 2022 SOMFY ACTIVITES SA. All rights reserved.
Sonesse 30 DCT
a
a
1
b
b
2
c
c
3
d
d
4
a
1
b
2
c
3
a
1
b
2
c
3