EN
2.5.3.Modifying the drive rotation direction
To reverse the drive rotation direction:
1] Press and hold the Up and Down buttons
simultaneously
product briefly moves up and down.
2] Press and hold the Stop button until the
motorised product briefly moves up and
down.
2.5.4.Erasing the memory of the drive (factory default)
To reset the drive, press and hold the drive head
programming button or the Up, Stop and Down
buttons simultaneously, until the motorised
product briefly moves up and down 3 times.
→ All the settings are erased. Green LED blinks 5
times then orange LED is fixed on.
3.USE AND MAINTENANCE
NOTICE
This drive does not require any maintenance operations.
3.1.Mode selection: Roller or Tilting Mode
The drive is designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the drive to be set according to the type of application.
NOTICE
The drive is set (by default) to work in Roller mode.
To change the mode:
16
until
the
motorised
©
Copyright
2022 SOMFY ACTIVITES SA. All rights reserved.
1]
2]
Sonesse 30 DCT
x3