SOMFY Sonesse 30 DCT Manual De Instrucciones página 15

Sonesse 30 DCT
2.5.2.Readjusting the end limits
NOTICE
Orange LED blinks slowly until the new end limit is recorded.
2.5.2.1.Readjusting the upper end limit
1] Briefly press the Up button, to move the
motorised product to the upper end limit.
2] Press and hold the Up and Down buttons
simultaneously
product briefly moves Up and Down.
3] Press and hold the Up or Down button to
move the motorised product to the new
desired position.
4] To confirm the new position press and
hold the Stop button until the motorised
product briefly moves up and down and
green LED blinks 5 times.
2.5.2.2.Readjusting the lower end limit
1] Briefly press the Down button to move
the motorised product to the lower end
limit.
2] Press and hold the Up and Down buttons
simultaneously
product briefly moves up and down.
3] Press and hold the Up or Down button to
move the motorised product to the new
desired position.
4] To confirm the new position press and
hold the Stop button until the motorised
product moves up and down and green
LED blinks 5 times.
©
Copyright 2022 SOMFY ACTIVITES SA. All rights reserved.
until the motorised
until the motorised
1] 2]
3] 4]
1] 2]
3] 4]
EN
15