Filling A Pd-Tip - BRAND HandyStep S Instrucciones De Montaje

The volumes listed in the table are the only options possible. Since the
first dispensing step must be discarded, the number listed in the table is
always 1 step less.

4.3 Filling a PD-Tip

a.
997463
NOTICE
We recommend priming a new PD-Tip
before use. To do this, fill the tip with a
minimal amount of liquid and empty it
again. Small air bubbles in the area of
the piston after priming do not affect the
results.
a.
Push the locking/filling lever to the
lower stop.
NOTICE
Operating manual
43