R82 Stingray Guia Del Usuario página 32

Service information
Maintenance of a medical device is wholly the responsibility of the owner of that device. Failure to
maintain a device in accordance with the instructions may invalidate the device's warranty. Furthermore,
failure to maintain a device may compromise the clinical condition or safety of users and/or their
caregivers. Do not perform service and maintenance while the user is in the product.
Maintenance
Before every use it is recommended to:
• wipe off any residue and dirt from the
product using a cloth wrung in warm water
and a mild detergent/soap without chlorine
and dry before use
• Carry out a visual inspection, for any
damaged or worn-out parts.
Washing
The cushion and covers can be washed at 60°
using a mild detergent in a washing machine.
After washing, leave the washed item(s) to drip-
dry after washing
Warewashing machine
This product can be washed at 60° using a mild
detergent for 10 minutes in a washing machine
designed for medical devices. Use the machine's
drying function to dry the product.
Before washing remove the following items and
clean them separately:
• Accessories
• Cushioning
Disinfection
The product can be disinfected with a 70%
disinfectant IPA solution. It is recommended to
wipe off any residue and dirt from the product,
using a cloth with warm water and a mild
detergent/soap without chlorine and let it dry
before disinfection.
Service interval
A detailed inspection of the product must be
made every 12 months (every 6 months if the
product is used very often - daily use for more
than 7 hours), every time the product is reissued
for use and after a long term storage (more than
4 months). The inspection should be carried out
by a technically competent person who has been
trained in the use of the product.
The lifetime of this device in normal use is 8 years
if all maintenance and servicing is carried out in
accordance with the manufacturer's instructions
and demonstrably recorded. The device may be
reissued within its lifetime.
Service Check List:
Check and adjust the following functions as
per their intended use. Repair or replace any
damaged or worn-out parts. Please check the:
• Seat back is adjustable and can be locked
in position.
• Adjustment options for the foot rest.
• Product can be folded for storage or
transportation.
EN
• Nuts and bolts on the product are tightened.
• Check all fittings and buckles for signs of
worn out parts.
• Product for cracks or signs for worn-out
parts.
• All labels on the product are intact.
• Check that all wheels are moving freely
and that all wheel locks/brakes are easily
activated
Materials
• Aluminium
• Plastic
• Fabric
• Stainless steel
Surface treatment
The following surface treatment processes were
used to protect against corrosion:
• Lacquered surfaces = Polyester powder
coating or ED-coating
• Non-lacquered aluminium parts = Anodized
coating
• Non-lacquered steel surfaces = Galvanized
32
etac.com