Replace The Side Brushes; Clean The Sensors And Charging Pins; Clean The Swivel Wheel - EUFY RoboVac L35 Hybrid+ Manual Del Usuario

Replace the Side Brushes

The side brushes may become damaged after being used for a period of time. Follow
the instructions below to replace them.
• Pull off the old side brushes and snap the new ones into place until you hear a click.
• Make sure the left side brush marked with an L (Left) and the right side
brush marked with an R (right) are installed correctly. Otherwise, the
side brushes may be damaged.

Clean the Sensors and Charging Pins

To maintain the best performance, clean the sensors and charging pins regularly.
• Dust off the sensors, charging contact pins, and IR window using a cloth or cleaning
brush.
34 EN

Clean the Swivel Wheel

Hair or dust particles can easily get entangled in the swivel wheel. Be sure to clean the
swivel wheel periodically and as needed.
Wheel
Axle
1 Remove the battery cover.
EN 35