Clean The Side Brush; Replace The Side Brush; Clean The Sensors And Charging Pins - EUFY RoboVac G20 Hybrid Manual Del Usuario

Clean the Side Brush

Foreign substances, such as hair, can easily get tangled in the side brush, and dirt may
adhere to it. Be sure to clean it regularly.
1
Remove the side brush.
2 Carefully unwind and pull off any hair or string that is wrapped between the main
unit and the side brush.
3 Use a cloth dampened with warm water to remove dust from the brush or to
gently reshape it.
Only use the side brush when it is completely dry.
28 EN

Replace the Side Brush

The side brush may become damaged after being used for a period of time. Follow the
instructions below to replace it.
• Pull off the old side brush and snap the new one into place until you hear a click.

Clean the Sensors and Charging Pins

To maintain the best performance, clean the drop sensors and charging pins regularly.
• Dust off the drop sensors and charging contact pins using a cloth or cleaning brush.
Click
EN 29