universalblue UBE2410-21 Manual De Instrucciones página 36

use abrasive sponges or cleaners or stain removers under any
circumstances.
Aluminum foil, plastic products, objects made of synthetic material,
sugar or food with a high sugar content that have melted on the
surface of the unit should be cleaned as soon as possible and while
the surface is still hot.
It is recommended to clean the grids while they are still hot. Use the
necessary equipment to avoid burns. To remove the grease tray from
under the grate, it is a wise idea to wait until the grate cools down.
Greasing the Gas Valves
Over time, the gas valves can become stuck or difficult to manipulate.
In this case, they need to be cleaned and greased again.
A technician authorized by the manufacturer must perform
this procedure.
If there is a gas leak, please follow the steps below:
Do not turn on the light.
Do not turn on or turn off any electrical appliances and do not
touch any electrical outlets.
36