Technical Data - AEG L 82470 BI Manual De Instrucciones

E

15. TECHNICAL DATA

Dimension
Electrical connection
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture
Water supply pressure
Water supply
Maximum Load
Energy Efficiency Class
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
A
B
C
D
A
C
B
Width/ Height/ Depth/
Total depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
1)
Cotton
Maximum
Counter-magnet
WARNING!
Do not remove the screw B.
The appliance is prearranged for a magnetic
closure of the door. To enable a correct
operation of this device, it is necessary to
screw the counter-magnet A (steel disk +
rubber ring) in-to the inner side of the door.
Its position must correspond to the magnet B
on the appliance.
WARNING!
Do not remove the screw B.
If the door has to be opened from left to
right, invert the position of the plates E, the
magnet D and the plate C. Mount the
counter-magnet D and the hinges A as
previously described.
596 mm/ 820 mm/ 544 mm/ 560 mm
220-230 V
2000 W
10 A
50 Hz
IPX4
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Cold water
7 kg
A+++
1400 rpm
ENGLISH 31