Parts And Components; Before Use; Operation - cecotec COOK CONTROL 10300 ECOPOWER NUTRITION Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1.
1. Energy-generating knob
Rotate the switch to generate energy (ON).
2. Unit
Press to change the weighing unit (g/oz/ml)
Exit the KCAL mode to enter the weighing mode.
3. Tare
During the weighing process, short press this button to tare weight.
4. Kcal
Includes 7 food kcal values
Fig. 2.
Energy-generating knob
The device does not use batteries. Rotate the knob not less than 120º to generate full energy
(ON).

2. BEFORE USE

Take the device out of its package and remove all packaging materials.
Check carefully if there is any damage, and if there is, immediately notify the Technical Support
Service of Cecotec.

3. OPERATION

Place the scale on a flat, stable surface.
Rotate the power knob not less than 120º, the LCD display will show "0".
Place the food to be weighed on the scale (or in a bowl if required). The LCD will show the
weight results.
Fig. 3.
Tare function
Place the container on the device's platform. The LCD display will show the weight of the
container.
Press the tare function button to clear the weight of the container and reset to "0".
Place the ingredients inside the container. The display will show the weight of the food only.
Press the tare function button repeatedly to weight different foods.
The LCD display will show negative values when the container and the food have been removed
from the scale. To clear it, press the tare function button and the display will show "0" again.
14 COOK CONTROL 10300 ECOPOWER NUTRITION