Manual Settings; Setting An Alarm - Emos E0316 Manual Del Usuario

3. When receiving DCF signal, do not place the weather station near metal doors, window frames
and other metal structures or objects (washing machines, dryers, refrigerators, etc.).
4. In reinforced concrete structures (cellars, high-rise buildings, etc.), the reception of DCF signal
is weaker, depending on the conditions. In extreme cases, place the weather station close to a
window in the direction of a transmitter.
Reception of DCF radio signal is affected by the following factors:
• thick walls and insulation, basements and cellars;
• inadequate local geographical conditions (these are difficult to assess in advance);
• atmospheric disturbances, thunderstorms, electrical appliances with no interference elimination,
television sets and computers located near the DCF receiver.

Manual Settings

1. Press and hold the MODE button.
2. Then, repeatedly press the MODE button to choose settings for: hours – minutes – year – date
format – month – day – calendar language – time zone. You can navigate between the values by
pressing the MODE button; set values using the up
Calendar languages are as follows:
(ENG – English, FR – French, IT – Italian, ES – Spanish, NE – Dutch, DA – Danish, GE – German)
Setting 12/24 h Time Format, °C/°F Unit of Temperature
Repeatedly pressing the MODE button switches between 12/24 h time format.
Repeatedly pressing the
Atmospheric Pressure – History
The pressure value is displayed in field no. 4.
Below it is a chart of pressure history in up to the last 12 hours.
Repeatedly long-pressing the
Moving the weather station to another place will affect the measured values.
Measurement will stabilise within 12 hours of battery insertion or relocation of the weather station.
Temperature and Humidity Trend
temperature and
humidity trend indicator
Moon Phases (See Fig. 4)
The moon phase is displayed in field no. 13.
1 – Full moon
2 – Waning gibbous
3 – Last quarter
4 – Waning crescent
Displaying Maximum and Minimum Temperature and Humidity Readings
Measured values for outdoor temperature are displayed in fields no. 24 and 25, indoor temperature
in fields no. 7 and 8.
Measured values for outdoor humidity are displayed in fields no. 21 and 22, indoor humidity in fields
no. 11 and 12.
The memory of measured values is automatically erased every day at 00:00.
To manually erase the memory of measured values, long-press the

Setting an Alarm

Long-press the button; the time setting will start flashing.
Use the and buttons to set the alarm time.
To confirm and navigate in the menu, press
The alarm is activated by short-pressing the
Press the button again to deactivate the alarm; the
button switches between °C/°F unit of temperature.
button switches units of pressure between inHg and hPa/mb.
rising
.
button;
7
and down arrows.
constant
5 – New moon
6 – Waxing crescent
7 – First quarter
8 – Waxing gibbous
button.
will appear on the screen.
icon will disappear.
falling