Manual Settings; Moon Phase - Emos E0387 Manual De Instrucciones

2. Check the distance of the clock from sources of interference (computer monitors or television
sets). The distance should be at least 1.5 to 2 m during the reception of signal.
3. When receiving DCF signal, do not place the weather station near metal doors, window frames
and other metal structures or objects (washing machines, dryers, refrigerators, etc.).
4. In reinforced concrete structures (cellars, high-rise buildings, etc.), the reception of DCF signal
is weaker, depending on the conditions. In extreme cases, place the weather station close to a
window in the direction of a transmitter.
Reception of DCF77 radio signal is affected by the following factors:
• thick walls and insulation, basements and cellars;
• inadequate local geographical conditions (these are difficult to assess in advance);
• atmospheric disturbances, thunderstorms, electrical appliances with no interference elimination,
television sets and computers located near the DCF receiver.

Manual Settings

1. Long-press the SET button.
2. Then, repeatedly press the SET button to choose settings for:
calendar language – button beeping on/off (BP ON/FF) – DCF signal reception on/off (RCC ON/
OFF) – time zone (ZOE) – year – date format – month – day – 12/24h time format – hours – min-
utes – °C/°F unit of temperature – unit of pressure.
3. Navigate between the values by pressing SET, adjust settings using the up and down arrows
Calendar language abbreviations are as follows:
GER – ENG – ITA – FRE – DUT – SPA – DAN.
Atmospheric Pressure – History
The station displays atmospheric pressure and a chart of pressure readings in the last 12 hours in
field no. 19.
The chart of pressure history is animated (cannot be changed).
Moving the weather station to another place will affect the measured values.
Measurement will stabilise within 12 hours of battery insertion or relocation of the weather station.
Temperature and Humidity Trend
temperature and
humidity trend
indicator

Moon Phase

The moon phase is displayed in field no. 11. Icons for the main phases of the moon are as follows:
1 2 3
1 – new moon
2 – waxing crescent
3 – waxing crescent
4 – first quarter
5 – waxing gibbous
6 – waxing gibbous
Displaying Maximum and Minimum Temperature and Humidity Readings
Press the MEM button repeatedly to gradually display the maximum and minimum readings of
temperature and humidity.
Holding the MEM button while viewing MAX/MIN values will erase the memory.
The memory of measured values is automatically erased every day at 00:00.
rising
4 5 6
6
no arrow
constant
7 8 9
7 – full moon
8 – waning gibbous
9 – waning gibbous
10 – last quarter
11 – waning crescent
12 – waning crescent
/
falling
10 11 12
.