Electrical Connection; Design And Function; Overview; Mincer - CASO DESIGN FW 2500 Black Manual Del Usuario

3.5 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following instruc-
tions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage and frequen-
cy) on the rating plate with those of your electrical network. This data must agree in
order that no damages occur in the device. If in doubt, ask your qualifi ed electrician.
•
The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fi re that is involved with this.
•
Make sure that the power cable is undamaged and has not been installed under the
ice maker or over hot or sharp surfaces.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installati-
on checked over by a qualifi ed electrician. The manufacturer cannot be made respon-
sible for damages that are caused by a missing or damaged protective conductor.

4 Design and Function

This chapter provides you with important safety notices on the design and function of
the device.

4.1 Overview

4.1.1 Mincer

17
2
1
7
6
3
4 5
15
8
9 10
16
CASO FW 2500 Black
DE
EN
FR
IT
ES
NL
RUS
PL
SE
11
12
13
14
25