Safety Notices; Troubleshooting Table; Disposal Of The Old Device - CASO DESIGN FW 2500 Black Manual Del Usuario

DE

7.1 Safety notices

EN
ATTENTION
FR

Repairs of electrical appliances must be carried out by qualifi ed person who are
trained by the manufacturer.
IT

Repairs performed by untrained persons may result in considerable hazards for the
ES
user and damage the machine.
NL

7.2 Troubleshooting table

RUS
Problem
PL
The device does not
SE
start.
The device is blocked.
The device stoped.
PLEASE NOTE

If you cannot solve the problem by carrying out the steps described above, our Cus-
tomer Service will help you free of charge.

Clean the device before you send it to customer service.
8

Disposal of the Old Device

Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for
their functionality and safety. If these were put in the non-recyclable waste or
were handled incorrectly, they could be detrimental to human health and the
environment. Therefore, do not put your old device into the non-recyclable
waste under any circumstances.
PLEASE NOTE

Utilise the collection point, established in your town, to return and recycle old electric
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.

Ensure that your old device is stored safely away from children until it is taken away.
30 CASO FW 2500 Black
Solution
Please check whether the power plug is properly plugged.
Please check whether the assembly is done according to
assembly methods.
Turn the switch to R to loosen the blockage. If this is not
enough please switch of the device, unplug the cord and
deasemble the device to remove the blockage.
The device is overheated. Turn the switch to 0 and unplug
the device. Disassemble the device and remove ingre-
dients from it. Press the red reset button on the device's
base. Let it cool down for 60 minutes. Contact customer
service if overheating system is activated too often.