Unpack The Machine; Install The Spray Wand; Install The Wheels; Install The Upper Handle - GreenWorks GPW2000-1RBSC Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
Keep the extension cord clear of the working area. Position
the cord so that it will not get caught on lumber, tools, or
other obstructions while you are working with a power tool.
Failure to do so can result in serious personal injury.
3.2

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
If parts of the machine are damaged, do not use the
machine.
If you do not have all the parts, do not operate the
machine.
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
3.3

INSTALL THE SPRAY WAND

4
English
13
9
2
1. Push the end of the spray wand (4) into the gun handle
(2).
2. Turn the spray wand (4) clockwise until the tabs lock into
position.
WARNING
Make sure that the connection has no leakage.
3.4

INSTALL THE WHEELS

22
1. Insert axle (22) through the wheel (7) and handle frame.
2. Attach a washer (14) to the axle.
3. Insert cotter pin (15) through the hole of the axle.
3.5

INSTALL THE UPPER HANDLE

1. Push and hold the handle lock buttons on the upper
handle (5).
2. Move the upper handle (5) into the lower handle (6) until
the handle lock button clicks through the hole.
7
7
14 15
5
6
EN

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido