Unpack The Machine; Install The Upper Panel; Install The Hose Hook; Install The Spray Gun Holder - GreenWorks ELITE EPW2000 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
Keep the extension cord clear of the working area. Position
the cord so that it will not get caught on lumber, tools, or
other obstructions while you are working with a power tool.
Failure to do so can result in serious personal injury.
3.2

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
If the parts are damaged, do not use the machine.
If you do not have all the parts, do not operate the
machine.
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.3

INSTALL THE UPPER PANEL

10
1. Aligh the screw sleeves of the upper panel (10) with the
screw holes on the upper handle.
2. Push the screws (13) through the screw sleeves and
tighten them.
English
3.4
1. Push the hose hook (18) ends into the clips (29) behind
the front panel tightly .
3.5
1. Aligh the screw sleeves of the spray gun holder (2) with
the screw holes on the upper handle.
2. Push the screws (13) through the screw sleeves and
tighten them.
13
7

INSTALL THE HOSE HOOK

29
INSTALL THE SPRAY GUN
HOLDER
EN
18
2
13

Publicidad

Tabla de contenido
loading

Tabla de contenido