Assembly Instructions; Assembly Of Blower Pipes - Makita RBL500 Manual De Instrucciones Original

ASSEMBLY INSTRUCTIONS

ASSEMBLY OF BLOWER PIPES

Caution: Before performing any work on the blower,
always stop the engine and pull the spark plug
connectors off the spark plug.
Always wear protective gloves!
Caution: Start the blower only after having assembled it
completely.
1. Assemble straight pipe with swivel (3) into flexible pipe (1) and
tighten hose band 78 (2).
2. Install control handle (4) onto straight pipe with swivel and
tighten the clamp screw (5).
3. Assemble flexible pipe to elbow (6) on blower and tighten hose
band 91 (7).
4. Assemble straight pipe (8) to straight pipe with swivel, turning
straight pipe clockwise to lock it into place. Assemble end pipe
(9) in the same way.
5. Make sure all clamps are tight.
8