VALBERG 3S58 F WAD929C Instrucciones De Uso página 31

C
Practical information
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a
sponge to soak up water in the sump.
NOTE
If your dishwasher cannot work because of the ice, please
contact authorised service person.
Cleaning the spray arms
• The spray arms can be easily removed for periodic cleaning
of the nozzles to prevent possible clogging. Wash them
under running water and carefully replace them in their
seats, checking that their rotary movement is in no way
impeded.
• Grasp the middle of the spray arm, pull it upwards to
remove it. Wash the arms under a jet of running water and
replace it carefully to its seat. After reassembly, check that
the spray arms rotate freely. Otherwise, check that they
have been installed correctly.
29 EN