VALBERG WF 814 S566C Instrucciones De Uso página 13

B
Using the appliance
Option
Default
Cycle
Temp. (°C)
Wash cycles
40
Synthetic
40
Mix
40
Rapid 45'
Cold
Quick 15'
40
Wool
60
Allergy Care
40
Steam Care
-
Rinse & Spin
-
Spin Only
20
Sportswear
20
30
Jeans
-
40
Intensive
40
Cotton
NOTE
• For the maximum spin speed, programme time, and other details of the ECO
40-60 programme, please refer to the content on the Product Sheet page.
• The table shows which cycle offers which options for adjustment.
22
Default spin
Additional functions
speed in rpm
1400
1200
, , , , ,
800
, , , , ,
800
, , ,
800
800
, ,
800
, , , ,
800
, , , , ,
800
, ,
800
,
800
, , ,
800
, ,
800
, , ,
1400
800
1400
, , , , ,
EN
B
Using the appliance
Temp.
When needed, the washing temperature can be adjusted by pressing the temperature
button in the following steps: Cold - 20°C - 30°C - 40°C - 60°C - 90°C.
Delay
Set the Delay function:
Select a programme;
Press the Delay button to choose the time (the delaying time is 0-24 hr.);
Press [Start/Pause] to commence the delay operation
Choose the Programme Setting time
Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before starting
the programme. If the programme has already started, you should switch off the
programme to reset a new one.
Soil
The washing time will increase or decrease after you select it.
Pre Wash
The Prewash function can get an extra wash before main wash,it is suitable for
washing the dust rises to surface of the clothes;You need to put detergent into the
Case (I) when select it.
Extra Wash
Use for very dirty clothes. Select it to increase the washing time and intensity for
increased washing effect.
Speed Wash
This function can reduce the washing time.
23 EN
Delay
Start