Husqvarna TS 354XD Manual De Usuario página 16

4. Put the cutting deck in the transport position.
To set the cutting deck in transport
Refer to
position or mow position on page 14 .
5. Turn the ignition key to the "STOP" position and
remove the ignition key from the ignition.
To use the throttle control
The operating efficiency of the engine decreases
when the engine operates at less than full speed.
Full speed gives the best mower performance.
• Set the throttle control (A) to the "FULL" position
to operate the engine at full speed.
A
To use the choke control
Note:
Use the choke control to start a cold engine.
Do not use the choke control to start a warm engine.
A
1. Pull the knob (A) out to engage the choke
control.
2. Push the knob (A) slowly to disengage the choke
control.
To use the differential lock control
Note:
The product or system is not damaged if the
differential lock is engaged for a long period of time.
CAUTION:
differential lock while the product moves.
16
Do not engage the
Note:
If the differential lock (A) is engaged when
you turn, the grass can be moved or turfed.
1. Stop the product and push the differential lock
switch to the "ON" position.
2. Move the product forward. As the rear tires turn,
the differential lock engages.
To disengage the differential lock:
• Push the differential lock switch to the "OFF"
position.
Note:
If the differential lock does not disengage,
steer the product from side to side.
To use the headlight
• Push the power switch to position (A) to make
the headlight come on.
B
• Push the power switch to position (B) to make
the headlight go off.
To engage and disengage the
cutting deck
WARNING:
cutting deck without a deflector installed
to the grass discharge.
The product has an operator presence control
(OPC). When you go away from the seat with the
A
A
Do not operate the
1940 - 006 - 13.09.2022