Charging Battery; Charging Time - Uline H-10066 Manual De Instrucciones

TRANSPORTING THE STAPLER
To prevent accidental triggering while carrying the tool,
ensure handle is gripped by hand and index finger is
behind the shoulder. (See Figure 4)
MAN
POSITION GUIDANCE LASER SYSTEM
The stapler is equipped with a position guidance laser
system with one front laser. (See Figure 5)
Figure 5
NOTE: Laser is only activated when trigger
is actuated.
CAUTION! A person near the laser can feel
disturbed or distracted. Do not look directly
into laser or aim laser at other people.
PAGE 6 OF 42
Shoulder
Figure 4
SETUP CONTINUED

CHARGING BATTERY

1. Connect charger to outlet.
2. Insert battery in charger. (See Figure 6)
Figure 6

CHARGING TIME

• Charging of empty battery (80-100%) is
approximately 120-160 minutes.
• Ideal battery temperature during charging process
is 59-104°F (15-40°C).
• Avoid battery temperatures below 32°F (0°C) and
higher than 113°F (45°C) during charging.
• Battery can be charged at any time, regardless of
charge status.
WARNING! Only use batteries and charger
supplied with unit. Use of other batteries or
chargers can result in injury or fire.
NOTE: When green LED illuminates, charger is
ready for use.
Battery
Charger
NOTE: When green LED flashes, battery is
being charged.
NOTE: When green LED stays on, battery is
fully charged.
NOTE: When red LED stays on, battery
temperature is outside charge-temperature
range.
NOTE: When red LED flashes, see operating
instructions included with charger.
1022 IH-10066