Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Notes
• Analog 14 volts DC, digital 19 volts AC.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.
• The wire used for feeder connections to the track may be a
maximum of 2 meters / 78 inches long.
• WARNING! Sharp edges and points required for operation.
Important Notes
• The operating instructions and the packaging are a compo-
nent part of the product and must therefore be kept as well as
transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or spare
parts.
• The warranty card included with this product specifies the
warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
• The LEDs in this item correspond to Laser Class 1 according
to Standard EN 60825-1.
• The coupling drawbars included with the models can be used
for a prototypical car spacing.
General Note to Avoid Electromagnetic Interference: A
permanent, flawless wheel-rail contact is required in order to
guarantee operation for which a model is designed. Do not make
any changes to current-conducting parts.
4
Functions
• Built-in interior lighting in the cars. It can be controlled
digitally at the cab control car.
• Headlights change over with the direction of travel. To do this,
set the carriage to the address of the locomotive.
Only cab control car:
• The built-in electronic circuit in the cab control car for opti-
onal operation with a conventional DC locomotive controller
(max. ±14 volts), mfx, or digital systems adhering to the NMRA
norm.
• Automatic system recognition between digital and analog
operation.
• Automatic system detection between digital systems with
priority on mfx.
Headlights
Engineer's cab lighting
Interior lights
mfx
DCC
f0
f0
f1
f1
f3
f3
Publicidad
