Proposition 65; Installation; Unpack The Machine; Attach The Guard - GreenWorks 21332 Manual Del Operador

7

PROPOSITION 65

WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated
lumber.
Your risk of exposure to these chemicals varies
depending on how often you do this type of work. To
reduce your exposure to these chemicals, work in a
well-ventilated area, and work with approved safety
equipment, such as dust masks that are specially
designed to filter out microscopic particles.
8

INSTALLATION

WARNING
Remove the battery pack from the machine before
installation.
WARNING
Do not use accessories that are not recommended for
this machine.
8.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
English
8.2

ATTACH THE GUARD

Do not touch the cut-off blade.
1. Remove the screw (15) from the trimmer head with
a Phillips head screwdriver (not included).
2. Put the guard (9) onto the trimmer head.
3. Align the screw hole on the guard with the screw
hole on the trimmer head.
4. Tighten the screw.
8.3

ASSEMBLE THE SHAFT

1. Insert the lower shaft into the coupler on the upper
shaft.
Make sure the upper and lower part of shafts are
securely tightened before installing the battery pack
again.
2. Tighten the coupler (6).
7
WARNING
NOTE
EN