Hach 2100Q Manual Básico Del Usuario página 17

Error/Warning Description
Error - Security No password is
Please set password created.
before activating
security
Please enter at least Password must
one character. contain minimum of
one character.
Password incorrect. Incorrect password
Please retry. was entered.
Please disconnect Data storage does not
the USB cable from respond while
your computer. connected to the
meter and the
computer.
USB module Data storage is full.
memory full. Delete
data and try again.
Solution
Create a new Delete Last Reading
password. Failed!
Delete Data Log
failed!
Create a password of
Can't read data set!
at least one character.
Can't store data!
Enter the appropriate
Can't store to the
password.
Reading Log!
Disconnect the USB
Can't store to the
cable from the meter
Verify Cal Log!
and try sending data
again.
Error storing data!
Error reading data!
1. Connect
USB/power module to
the computer.
2. Download the
stored data to the
computer.
3. Delete Data Log on
the module.
Error/Warning Description
Error in the data
storage.
Solution
Turn the meter off and
on. If the error
message still occurs,
contact technical
support.
English 17