NOTE
►
Make sure that a suitable sandpaper is
correctly fitted on the polishing disc
♦
Switch the appliance on.
♦
Guide the appliance across the workpiece
parallel to its surface.
♦
Move the unit parallel and evenly over the
surface to be sanded.
♦
Do not press the appliance down. Pressing
down hard does not improve the performance.
♦
When you are satisfied with the result, turn off
the appliance.
Polishing
♦
Add a little polish to the fitted polishing attach-
ment
and the workpiece.
,
–
Polishing hood
–
Polishing hood
–
Fake fur attachment
polishing
♦
Manually spread the polish over the surface
you want to polish.
NOTE
►
Do not apply the polish to the same surface
too often as the particles it contains could
damage the finish.
►
Mask any plastic components beforehand as
these could be faded by the polish.
♦
Switch the appliance on.
♦
Guide the appliance across the workpiece
parallel to its surface.
♦
Move the appliance parallel and evenly over
the surface being polished.
♦
Do not press the appliance down. Pressing
down hard does not improve the performance.
♦
When you are satisfied with the result, turn off
the appliance.
■
58
│
GB │ MT
.
(orange) for pre-polishing
(black) for final polishing
for high-gloss
ATTENTION!
►
Depending on the size and nature of the
workpiece, suitable safety precautions must
be taken. Use suitable clamps to prevent the
workpiece from slipping.
Working procedures
■
Switch the appliance on before applying it to
the workpiece.
■
Apply minimal pressure when working.
■
Work at a constant speed.
■
Carry out the polishing process parallel to the
surface and overlap the polishing strokes.
■
After completing the task, lift the appliance from
the workpiece and then switch it off.
Maintenance and cleaning
WARNING!
►
Always disconnect the battery pack
before carrying out any work on the appli-
ance.
The appliance is maintenance-free.
■
Always clean the appliance directly after
completion of work.
■
Use a dry cloth to clean the housing.
■
Remove any sanding dust stuck to the appliance
with a brush.
■
Never use sharp objects, petrol, solvents or
cleaning agents which can damage plastic. Do
not allow any liquids to get into the interior of
the appliance.
■
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
PAAP 12 C3