Checking the battery charge level
When the appliance is switched on, the remaining
charge is shown on the battery LED
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Assembly/disassembly
of the polishing disc
♦
Press the spindle lock
♦
Screw the polishing disc
screw thread
.
♦
Proceed in the reverse order to remove the
polishing disc
.
Fitting the attachments
ATTENTION!
►
Be sure to remove the battery pack before
fitting or removing the attachments
,
.
♦
The polishing disc
ments
,
,
,
sponding Velcro fasteners.
♦
To change them, lift the side of the attach-
ment
,
,
,
ing disc
.
♦
First choose a sandpaper
press it onto the polishing disc
it is properly centred.
♦
Now select the polishing hood
for pre-polishing and push it onto the polishing
disc
. Make sure it is properly centred.
♦
Now select the polishing hood
final polishing and press it onto the polishing
disc
. Make sure it is properly centred.
♦
For the final finish, select the fake fur attach-
ment
and press it onto the polishing
disc
. Make sure it is properly centred.
Fitting the additional handle
♦
The additional handle
the left or right side of the appliance head,
depending on the mode of operation.
PAAP 12 C3
as follows:
and hold it down.
clockwise onto the
,
,
and supplied attach-
are fitted with corre-
and pull it off the polish-
for sanding and
. Make sure
(orange)
(black) for
can be screwed onto
Use
NOTE
►
Always switch the hand grinder on before
applying it to the workpiece.
Switching the appliance on
♦
Press the safety lock-out
with the
symbol to unlock the ON/OFF
switch
.
♦
Press the ON/OFF switch
Switching the appliance off
♦
Release the ON/OFF switch
♦
Press the safety lock-out
with the
symbol to lock the ON/OFF
switch
.
2-speed gearbox
CAUTION!
►
Operate the speed selector switch
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
In first gear
(speed selector switch
you can reach a speed of approx. 2800 rpm.
In second gear
(speed selector switch
you can reach a speed of approx. 8300 rpm.
Grinding
WARNING!
►
Dust from materials such as paints, some
types of wood and metal can be harmful to
health.
►
Contact with or inhalation of these dusts can
represent a health hazard for the person
operating the appliance and any other
people in the vicinity.
►
Wear safety goggles and a protective dust
mask!
on the side
.
.
on the side
only
in position 1)
in position 2)
GB │ MT
│
57
■