Assembly Instructions - SPORTSTECH KS250 Manual De Instrucciones

i
Follow these instructions carefully please, and your pull-up bar will be ready for
training within about just 5 minutes. This pull-up bar may only be used in
door frames with a width of 78 - 110 cm.
Before installing, find a suitable, sturdy door frame made of solid building material. Make sure
the door frame can withstand the forces exerted by attaching the pull-up bar.
Door frames made from these materials
are suitable for attaching the KS250:
Concrete
Stone
CPL plastic
Solid entrance door
Security door
Solid walls made of brick, stone, concrete and
door frames made of solid wood or metal are
resilient and offer the KS250 very good sup-
port. Such frames are generally perfectly suited
for attaching a pull-up bar and the associated
brackets.
Before attaching, please clean both your door frame and the padding of the pull-up bar carefully with a dry clo-
th, without the use of cleaning agents. Before installation, remove all dirt, grease and liquids from the KS250
and your door frame to prevent the device from slipping.

2. ASSEMBLY INSTRUCTIONS

17
Door frames made from these materials
are NOT suitable for attaching the KS250:
Wood
Glass
Hollow doors / frames
Soft or lighter building materials such as highly
porous bricks, aerated concrete, glass or hol-
low door frames are not suitable. These would
not stand the load, and the brackets would rip
out.
EN