Assembly Instructions; Installation Of The Device - SPORTSTECH KS700 Manual De Instrucciones

Installation of the device:

FIRMLY TIGHTEN ALL COMPONENT PARTS AND PRE-ASSEMBLED PARTS!
Step 1
Attach the handlebars to the side of the mainframe so that the front handles face
away from the mounting plate. Secure the handles with the safety bolts. Be sure to
insert the bolts from above so that they can not be pulled out accidentally.
Step 2
Use the built-in pull-up bar with mounting plate to mark the mounting holes for dril-
ling through the actual holes in the mounting plate. Make sure that there is sufficient
space between the pull-up bar and the intended structure to which the bar is to be
fixed. Then remove the mounting plate and align the drilling points accurately using
a spirit level before you begin drilling!

3. ASSEMBLY INSTRUCTIONS

22