Publicidad
Idiomas disponibles
Idiomas disponibles
Step 6. Carefully lift the assembly and rest the
hanger ball of downrod assembly on the hanger
bracket attached to the outlet box. Be sure the
groove in the hanger ball is lined up with the tab
on the hanger bracket. (Fig.8)
Groove
Tab
OK
Figure 8
Make the Electric
Connections
WARNING: To avoid possible electrical shock, be
sure electricity is turned off at the main fuse box
before wiring.
WARNING: Fan must be installed at a maximum
distance of 20 feet from the transmitting unit for
5.
proper signal transmission between the transmitting
unit and the fan's receiving unit. If you feel you do
not have enough electrical wiring knowledge or
experience, have your fan installed by a licensed
electrician.
Step 1. Motor to receiver electrical connections:
Connect the black wire from the fan to the black wire
from the receiver. Connect the white wire from the
fan to the white wire from the receiver. Connect the
blue wire from the fan to the blue wire from the
receiver. (Fig.9)
Step 2. Receiver to house supply wires electrical
connections: Connect the black (hot) wire from the
NO
ceiling to the black wire marked "AC IN L" from the
receiver. Connect the white (neutral) wire from the
ceiling to the white wire marked "AC IN N" from the
receiver. (Fig.9)
Step 3. Ground wires connections: Connect the
GROUND wire from the house to the GREEN wires
from the motor assembly and mounting plate. (Fig.9)
Secure all wire connections with the plastic wire nuts
provided.
Step 4. Place the receiver into the hanger bracket and
keep flat in opposition of ceiling. (Fig. 10)
Outlex box
Black
White("AC IN N")
Black("AC" IN L")
Receiver
White
Black
Black
White
Figue 9
Receiver
Figue 10
White
Ground wire
Ground wire
BLUE
Ground wire
Ground wire
BLUE
Hanger
bracket
Publicidad
