Boneco S200 Manual página 23

HANDLING
SWITCHING ON AND OFF
The BONECO S200 is operated manually. The appli-
ance will run until the control knob is moved to the
"0" position.
If the water tank is empty, automatic shut-off pre-
vents the appliance from overheating or becoming
damaged.
1. Switch on the BONECO S200 by moving the con-
trol knob from the "0" position to the "I" position.
2. Increase the humidity output by moving the con-
trol knob to the "II" position.
3. Switch off the appliance once the desired humidi-
ty has been reached.
DISPLAY DURING OPERATION
The LED ring on the control knob indicates the ope-
rating state.
Blue (constant): The appliance is functioning nor-
mally; there is water in the tank.
Red (constant): The appliance is switched on. How-
ever, the humidifying function has been switched
off automatically because the water tank is empty.
Blue (pulsing): Cleaning mode is active.
23
en