Boneco S200 Manual página 25

CLEANING FUNCTION
SAFETY INSTRUCTIONS
Always unplug the BONECO S200 and wait one
hour so the remaining water can cool down.
Failure to do so can result in severe burns!
PROCEDURE
Although the anti-mineral pad absorbs most of the
lime in the water, the heating plate of the BONECO
S200 experiences limescale build-up after an ex-
tended operating time.
The BONECO S200 is equipped with a cleaning
function for simple and convenient descaling. This
warms and cools the heating plate multiple times
in order that the lime becomes crumbly and can be
easily removed.
DURATION OF THE CLEANING
The cleaning usually lasts between 1 and 4 hours.
However, the duration can be adjusted at your
discretion until the desired effect is achieved.
STARTING THE CLEANING
1. Switch off the BONECO S200 and let it cool down
for 1 hour.
2. Remove the anti-mineral pad and empty the wa-
ter tank.
3. Mix 1 bag CalcOff with 1 liter (about 1 quart) of
®
warm tap water.
4. Add the mixture to the BONECO S200.
5. Move the control knob to the
the cleaning.
6. Switch off the BONECO S200 after the desired
cleaning time.
7. Unplug the BONECO S200 and rinse the water
base with tap water.
8. Place the anti-mineral pad back in the water
base.
25
en
position to start