TOPDON BT600 Manual Del Usuario página 14

2) Select the corresponding battery type and press [ENTER
/ PRINT]. The specific battery type is usually listed on the
battery label.
3) Select the corresponding battery standard and press [ENTER /
PRINT]. The specific battery standard will also be listed on the
battery label.
Please refer to the following table for specific battery
standards and test ranges.
Measurement
Standard
CCA
EN I 14
BATTERY TYPE
REGULAR FLOODED
AGM
GEL
EFB
Figure 4.1.2
SELECT STANDARD
CCA
JIS
IEC
SAE
BCI
Figure 4.1.3
Description
Cold Cranking Amps, specified by
SAE & BCI, most
frequently used value for starting
battery at 0°F(-18°C)
EXIT ENTER
DIN
EN
GB
MCA
CA
EXIT ENTER
Measurement
Range
100-2000