TOPDON BT600 Manual Del Usuario página 20

5) The test result will appear on the display.
Loaded/Unloaded Voltage and Ripple:
• The Loaded Voltage means the voltage measured when
turning on the on-board electrical appliances.
• Unloaded Voltage refers to the voltage measured when
turning off the on-board electrical appliances.
• Ripple: A vehicle's battery operates on one-way direct current
(DC) electricity, while alternators output alternating current
(AC) electricity. In this process, the power needs to go through
the diode rectifier to turn into a direct current - that's when
the ripple occurs.
SECTION 5
REVIEW DATA
This function saves the test results automatically. This way, you
can go back and check previous data at any time.
1) Select REVIEW DATA and press [ENTER / PRINT].
EN I 20
CHARGING TEST
CHARGING LOW
LOADED
UNLOADED
RIPPLE
Figure 4.3.5
12.95V
12.95V
5mV
EXIT ENTER