Before Operation; Remote Control - Aiwa XC-37M Manual De Instrucciones

BEFORE OPERATION

To turn on the unit
After connecting the AC cord of the connected amplifier, press the
POWER button on the amplifier and on the CD player.
The display window lights up.
After use
Press the POWER button to turn off the power. 6 is displayed dimly
on the display window.
When the radio reception of connected stereo system
contains noise
Turn off the power of this CD player.
The flash window
The flash window lights up during power on and flashes when
the disc compartment is opened or closed, and when the trays
are rotated.
To turn the flash window off, press the POWER button on the
unit while keeping the s STOP/CLEAR button pressed.
To turn the flash window back on, repeat the procedure.
Auto power off (SLEEP)
Press the SLEEP button on the unit during CD playing. The
SLEEP indicator is displayed, and the power automatically turns
off when the play finishes.
The SLEEP button can function only when it is pressed during
CD playing.
To cancel the auto power off
Press the SLEEP button while CD playing, so that SLEEP
indicator on the display disappears.
NOTE
• If the SLEEP button is pressed while the repeat play is in
operation, the repeat play is canceled.
• Do not subject the unit to shocks while the disc compartment is
opening or closing. Doing so can cause errors or damage the
discs.
3
ENGLISH
THE REMOTE CONTROL
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor in the display window should be approximately 5
meters (16 feet). When this distance decreases, replace the
batteries with new ones.
NOTE
• If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
• The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
plug (ø6.3 mm, 1 / inch).
4