Cd Playing; Basic Operations; Loading Discs; Playing Discs - Aiwa XC-37M Manual De Instrucciones

CD PLAYING

BASIC OPERATIONS

LOADING DISCS

Press the z OPEN/CLOSE button to open the disc
compartment. Load disc(s) with the label side up.
To load one or two discs, place the disc(s) on the tray(s) in the
direction of the arrows as illustrated.
Tray
number
To load three to five discs, press the DISC CHANGE button to
rotate the trays after placing two discs. Place the next disc on
the empty tray. Each time the DISC CHANGE button is pressed,
the trays rotate and one disc can be placed.
To use with the remote control, press the CHANGE button
instead.
After placing the discs, press the zOPEN/CLOSE button to
close the disc compartment.
The display shows the information of the disc to be played.
1 Disc number of the disc in the playback tray
2 Total number of tracks on the selected disc
3 Total playing time of the selected disc
4 OVER indicator
This is displayed when the disc contains 21 tracks or more.
While a track after 20th is being played, the OVER indicator
lights up.
5 Music calendar
Note that only the first 20 tracks are displayed, even if the
disc contains 21 tracks or more.

PLAYING DISCS

Load disc(s).
To play all discs in the disc compartment, press the ca
button or press one of the DISC DIRECT PLAY buttons
twice.
All discs are played once.
Number of track being played
To play one disc only, press one of the DISC DIRECT PLAY
buttons.
The disc with the selected tray number is played once.
Only the selected disc tray number is surrounded
To play with the remote control
Press one of the DISC 1-5 buttons to select a disc.
To stop play, press the s button.
To pause play, press the ca button. To resume play, press
again.
To search for a particular point during playback, keep the
r or t button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback, press
r or t button repeatedly.
To remove discs, press the z OPEN/CLOSE button.
You can remove the two discs that face you. When the disc to be
removed does not face you, press the DISC CHANGE(CHANGE)
button repeatedly.
To check the remaining time
Press the DISPLAY button during playback. Each time it is
pressed, the elapsed time of the playing track, the elapsed playing
time of the disc, the amount of time remaining until the current
track finishes playing, and the amount of time remaining until all
tracks finish playing are displayed in turn.
To skip discs
Press the DISC SKIP button on the remote control to skip a disc
and press the c/a button to play the next disc. Play begins
with the next disc and all the discs are played once, including the
skipped disc.
• Discs can be skipped during play.
Selecting a track directly
1 Press one of the DISC DIRECT PLAY(DISC 1-5) buttons to
select a disc.
2 Press the numbered buttons and the +10 button to select a
track.
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
The selected track starts to play and continues to the end of
that disc.
Elapsed playing time of track
4
ENGLISH
En