EGO ZT4200S Manual Del Operador página 23

A. UNPACKING
WARNING: To reduce the risk of injury or mower damage, do not use a knife to cut the nylon straps. Use
scissors or side cutters.
WARNING : To reduce the risk of damage, remove watches or other fragile and valuable items from your
wrists. There's a risk of accidental contact with steel frame elements.
Required tools:
◾
Scissors or side cutters (not supplied)
◾
one 13mm open-end wrench (supplied)
◾
one socket wrench with 13mm end (supplied)
1. Remove the plastic cover from the mower.
2. Cut the nylon straps and remove the accessory box located in the center seat area of the mower and remove the
two wrenches inside (Fig. 3a).
3. Use the the 13mm open-end wrench and the 13mm end of the socket wrench to remove all 18 bolts that hold
together the frame in the numerical order shown in Fig. 3a.
NOTE: To simplify and speed up the process, use an impact wrench with a 1/2 in (13 mm) socket (not supplied).
3a
7
17
11
8
18
5
16
9
13
Required for assembly
x4 (+2)
12
15
14
13
x1
x1
14 13
x1
x2
x1
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC
14 13
13
3
10
1
6
Accessory Box
x1
4
2
23