EGO ZT4200S Manual Del Operador página 55

7. Clean the deck or replace the blade as directed in
"REPLACING THE CUTTING BLADES" in this manual.
8. When the cleaning or blade replacement is complete,
reassemble the deck onto the mower in the reverse order.
NOTICE: Reconnect the motor cables, ensuring that the left motor
cable is connected to the left motor while the right motor cable to
the right motor. There are "left" or "right" indicated on the cables.
NOTICE: Make sure both motor cables are connected to the motor
with proper torque. The recommended torque is 1.3-1.6 ft-lb (1.8 -
2.2 Nm).
REPLACING THE CUTTING BLADES
WARNING: Always protect your hands by wearing heavy gloves
or wrapping the cutting edges with rags or other materials when
performing any maintenance on the mower blade. Always remove the safety key and battery packs when servicing or
transporting the mower.
Required tools:
◾
Torque wrench with 9/16 in (14 mm) socket (not supplied)
◾
Screwdriver or metal rod 5/16 in (8 mm) or a little less in diameter (not supplied)
◾
Screwdriver or metal rod 1/4 in (6.35 mm) or a little less in diameter (not supplied)
Tools that make life easier (not supplied): Impact wrench with 9/16 in (14 mm) socket make removing the blade bolts
much easier.
25b
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC
Blade Motor
Deck Hook
Deck
55