EGO ZT4200S Manual Del Operador página 32

H. CHECKING FOR FIRMWARE UPDATES
To assure that your mower is in top shape, install the EGO Power+
App on your smartphone or tablet and periodically check for
available firmware updates. EGO Power+ App can be downloaded
for free from Apple App Store or Google Play.
TO INSTALL AND SET UP THE APP
1. Download the EGO Power+ app from App Store for iOS devices
such as iPhone or from Google Play for Android devices.
2. Make sure that Bluetooth is enabled on your mobile device
and your device is connected to internet.
3. In the app, press "SIGN IN" if you already have an account or
"SIGN UP" and follow the steps to create a new account.
4. Briefly press the "Start/Stop" button on the mower – the LCD screen will light up and display the "fuel gauge". Do
NOT hold the button down to fully turn on the mower (the screen and ALL the buttons light up).
5. In the app, tap "Add Tool" and follow the app's instructions to scan the QR code. The location of the QR code and
Serial Number is shown in Fig. 9.
6. If the app fails to scan the QR code, you will be prompted to manually enter the serial number. The app will add your
mower to "MY TOOLS".
7. Locate the Bluetooth
it does not, please try to perform the following troubleshooting steps:
a. Restart your app.
b. Restart your mower by turning it off and on.
c. Hold down the CCS button "
button is located below the LCD screen on your mower.
d. Delete and add the mower again within the app.
TO UPDATE THE FIRMWARE
Firmware is an operating system running on your mower's on-board computer. Periodically new versions of firmware
become available. It is highly recommended that the latest version is installed on your mower to make sure that the
mower delivers the best performance, safety, and energy consumption.
1. Tap on the mower icon in the app.
2. In the Status screen, if you see a green
version installed and no action is necessary. If you see a red "UPDATE!" button, tap on it to install the latest
firmware. The mower status indicator over the LCD screen will flash ORANGE during update.
3. Follow the app's instructions to complete the firmware update. This step will require you:
◾
To NOT SIT on the mower's seat.
◾
To quickly press the "Start/Stop" button located next to the safety key on your mower to make sure that the LCD
screen is on.
◾
To pull up the red PTO switch on the mower.
32
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC
button on the app screen and tap it. The app should automatically connect to your mower. If
" on your mower for 4 seconds and the app will disconnect from your mower. This
mark underneath the word "FIRMWARE", your mower has the latest
9 QR Code
Serial Number