Toro 115-4029 Instrucciones De Instalación página 3

3
Installing the Air Cleaner
Parts needed for this procedure:
1 Engine mounting bracket
1 Canister assembly
3 Flange-head bolt
2 Washer
2 Lock washer
2 Nut
1 Plug
Procedure
1. Assemble the engine mounting bracket to the
canister mounting bracket using 2 flange-head bolts,
washers, lock washers, and nuts as shown in Figure 5.
1. Engine mounting bracket
2. Canister mounting bracket 6. Nut
3. Flange-head bolt
4. Washer
2. Install the plug into the diagnostic port on the air
cleaner canister (Figure 5).
3. Remove and save the bolt on the upper and inner
edge of the muffler guard as shown in Figure 6.
Figure 5
5. Lock washer
7. Plug
1. Bolt
4. Remove the bolt securing the upper corner of the
valve cover on the left side of the machine (Figure 7).
1. Mounting bracket
assembly
2. Bolt removed from the
muffler guard
5. Install the mounting bracket assembly to the engine
as shown in Figure 7, using the bolt you removed
3
Figure 6
2. Muffler guard
Figure 7
3. Bolt removed from the
valve cover
4. Flange-head bolt