Publicidad
Idiomas disponibles
Idiomas disponibles
STARTING UP THE HEDGE TRIMMER
- Please make sure that there are children or
other people within a working range of 50
feet or 15 meters (5). Also pay attention to
any animals in the working vicinity.
- Before operating, always check that the
Hedge trimmer is safe for operation.
Check the security of the throttle lever. The
throttle lever should be checked for smooth
and easy action. Check for proper functioning
of the throttle lever lock. Check for clean and
dry handles and test the function of the STOP
switch. Keep handles free of oil and fuel.
Start the Hedge Trimmer only in accordance
with the instructions.
Do not use any other methods for starting
the engine!
- Use the Hedge Trimmer only for applications specified.
- Start the Hedge Trimmer engine only after the entire assembly is done.
Operation of the Hedge Trimmer is permitted only after all the appropriate accessories
are attached!
- Before starting, make sure that the cutter blade will not contact any objects such as
branches, stones, etc.
- The engine is to be stopped immediately if there are any engine problems.
- When working with the Hedge Trimmer, keep both hands on handles always wrap
your fingers tightly around the handle, keeping the control handle cradled between
your thumb and forefinger. Keep your hand in this position to have your times. Make
sure your control handle of moisture, pitch, oil or grease machine under control at all
is in good condition and free.
Publicidad
