Publicidad
Idiomas disponibles
Idiomas disponibles
and have grown through the fence.
The blade must not contact the fence; otherwise the blades may be destroyed.
Do not use the Hedge Trimmer continuously for a long time. It is normal to take a
-
break of 10 to 20 minutes after every 50 minutes operation.
Should the cutting blades hit stones or other hard objects, immediately switch off
-
the engine and inspect the cutting blades for damage. Replace damaged blades
before re-commencing work.
The engine must be switched off immediately in case of any engine problems.
-
Operate the Hedge Trimmer with as little noise and confination as possible in
-
particular check the correct setting of the carburetor and the fuel/oil ratio.
Do not attempt to remove jammed cut material when blades are running. Put unit
-
down, turn it off, and remove necessary cuttings.
MAINTENANCE INSTRUCTIONS
Turn off engine and remove the spark plug connector when replacing or
-
sharpening cutting tools ， also when cleaning the cutter or cutting device or
carrying out any maintenance.
Never straighten or weld a damaged cutting blade.
-
Inspect the cutting blades with the engine switched off
-
at short, regular interval for damage.(Detection of
hairline cracks by means of trapping-noise test) Beware
the teeth are sharp.
Clean the Hedge Trimmer at regular
-
intervals and check that all screw and
nuts are well tightened.
Never service or store the Hedge
-
Trimmer in vicinity of naked flames to
avoid fires.
Always wear leather gloves when
-
handling or sharpening in blades as
they are sharp.
Blade sharpening
If the edges are rounded and do not cut
well any more, grind off only the shaded
portion. Do not grind the contact surfaces
(sliding surfaces)of the top and bottom
edges.
Before grinding, be sure to secure the blade firmly and switch off the engine and
-
remove the speak plug cap.
Wear gloves, protective glasses, etc.
-
An edge ground too much at a time or ground many times will lose its hardened
-
layer. It becomes rounded and dull very quickly in use.
Blade adjustment
Publicidad
