Publicidad
Idiomas disponibles
Idiomas disponibles
engine is reassembled.
Any maintenance or adjustment work that has not been included and described in this
manual is only to be performed by Authorized Service Agent.
DAILY CHECKUP AND MAINTENANCE
To ensure a long service life and to avoid any damage to the equipment, the following
servicing operations should be performed at regular intervals.
Before operation, check the machine for loose screws or missing parts. Pay
-
particular attention to the tightness of the cutter blade screws – Every 8 hours
(Daily)
Before operation, always check for clogging of the cooling air passage and the
-
cylinder fins. Clean them if necessary – Every 8 hours (Daily)
Perform the following work daily after use:
-
⚫ Clean the Hedge Trimmer externally and inspect for damage.
⚫ Clean the air filter. When working under extremely dusty conditions, clean the
filter several times a day.
⚫ Check the blades for damage and make sure they are firmly mounted.
STORAGE
When keeping the machine in storage for a long time, drain fuel from the fuel tank
-
machine at a place as dry as possible.
Abide by Federal and Local regulations for safe storage and handing of gasoline.
-
and carburetor, as follows. Drain all fuel
from the fuel tank.
Remove the spark plug and add a few
-
drops of oil into the spark plug hole. Then,
pull the starter gently to confirm that oil
film covers the engine inside and tighten
the spark plug.
Clear dirt or dust from the cutter
-
blade and outside of engine, wipe them
with an oil-immersed cloth and keep the
Publicidad
