Publicidad
Idiomas disponibles
Idiomas disponibles
- Please make sure that there are no children or
other people within a working range of 15 meters
or 50 feet, also pay attention to any animals in the
working vicinity.
- Before use always check that Hedge Trimmer is
safe for operation. Check the cutting device is not
damaged. The control lever for easy action and
check for proper function of the STOP switch.
Rotation of the cutting device during idling speed is
not allowed.
Check with your dealer for adjustment if in doubt.
Check for clean and dry handles and test function
of the STOP switch.
- Start the Hedge Trimmer only in accordance with
the instructions.
Do not use any other methods for starting the
engine (See Starting).
- Start the Hedge Trimmer engine only after the engine assembly is done. Operation
of the engine is only permitted after all the appropriate accessories are attached.
Otherwise there is a risk of injury.
- Before starting, make sure that the cutting device has no contact with objects such
as branches, stones, etc.
- Before trimming, inspect area for wires for wires, cords, glass or other foreign objects
which could come in contact with the blade.
Electrical shock. Be aware of any and all electric lines and electric fences. Check all
areas for electrical lines before cutting.
STARTING THE MACHINE
Move at least 3 meters away from the place of
refueling. Place the Hedge Trimmer on a clean area
of ground make sure that the cutting tool does not
come into contact with the ground or any other
objects Cold starting (When the engine is cold or it
has been stopped for more than 5 minutes or when
fuel is added to the engine).
1 Push the STOP switch (1) to "1"position
2 Squeeze first the lock lever A and then the throttle
lever B (fig 1)
3 Keeping the throttle lever B
depressed, then press the throttle lock
C inward (fig 2)
4 Keeping the throttle lever C
depressed, release the throttle lever B
this will lock the throttle lever B in
Publicidad
